RGB Front Bumper Fog Light Upgrade for Model 3/Y
RGB Front Bumper Fog Light Upgrade for Model 3/Y
Couldn't load pickup availability
7-Color Dynamic RGB Front Fog Lights for Tesla Model 3 & Model Y
Replace the original front bumper fog-light assemblies with a vehicle-specific LED upgrade that combines functional front illumination with a built-in seven-color flowing light effect and an optional integrated turn-signal function.
Seven-Color Dynamic Flow
Seven colors automatically transition through the light assembly in a continuous flowing-water effect for a distinctive front-end appearance.
Optional Turn-Signal Function
The With Turning Signal configuration adds an integrated turn-signal lighting function to the upgraded bumper-light assembly.
Vehicle-Specific Plug-and-Play
Designed to install in the factory front-bumper fog-light position using the corresponding vehicle connections without cutting or splicing the original wiring.
Why These RGB Fog Lights Stand Out
The lighting is built into a vehicle-specific fog-light housing that replaces the corresponding original bumper assembly rather than attaching a universal strip to the exterior.
The integrated RGB system continuously transitions through its seven-color sequence for a moving light effect across the front bumper.
Dedicated Model 3 and Model Y versions are shaped around the corresponding factory fog-light opening for a more integrated finished appearance.
Manufacturer documentation describes the assemblies as weather-resistant and suitable for normal rain, snow and exterior vehicle use.
Current installation guidance identifies a plug-and-play connection rather than requiring permanent modification of the original Tesla wiring harness.
The RGB Colors Cannot Be Manually Fixed
This product is not an app-controlled RGB light. The seven colors automatically cycle through a built-in flowing sequence. Current manufacturer instructions specifically state that a single RGB color cannot be manually selected and held continuously.
Seven Colors in One Dynamic Light Assembly
Current manufacturer documentation specifies seven automatically changing RGB colors.
Colors transition across the illuminated section in a continuous dynamic flowing pattern.
No verified smartphone app or Bluetooth controller is listed for the current product.
A red, blue, green or other RGB accent cannot be manually locked as the permanent display color.
Rules for colored forward-facing exterior lights vary by country, state and region. Dynamic RGB colors may be restricted on public roads in some locations. Use the product in accordance with applicable local vehicle-lighting requirements.
Direct Replacement for the Original Fog-Light Position
Confirm your vehicle is the legacy Model 3 or Model Y generation covered by the current selector before removing any original lighting components.
Access to the original front bumper light assembly may require removal or loosening of the corresponding wheel-arch, underbody or bumper trim according to the installation guide.
Disconnect the original fog-light connector and remove the factory light from its mounting position.
Position the vehicle-specific replacement assembly in the original bumper location and secure it using the corresponding factory mounting points.
Connect the matching electrical interface according to the selected With Turning Signal or Without Turning Signal configuration.
Verify normal illumination, RGB flowing operation and the turn-signal function when applicable before reinstalling all removed bumper or wheel-arch trim.
Current manufacturer installation guidance describes the light as plug-and-play and does not require cutting or splicing the original Tesla wiring.
The current product selector only covers Model 3 2017–2023.10 and Model Y 2020–2025.03. The redesigned Highland and Juniper front bumpers require different lighting assemblies and should not be assumed compatible.
Specifications
| Attribute | Details |
|---|---|
| Product | RGB Front Bumper Fog Light Upgrade |
| Source Variant 47108344053992 | Model Y 2020–2025.03 / With Turning Signal |
| Model 3 Compatibility | 2017–2023.10 |
| Model Y Compatibility | 2020–2025.03 |
| Model 3 Highland | Not Compatible |
| Model Y Juniper | Not Compatible |
| Lighting Technology | LED / RGB Integrated Light Guide |
| RGB Colors | 7 Colors |
| RGB Behavior | Automatic Dynamic Flowing-Water Sequence |
| Manual Fixed-Color Selection | Not Supported |
| App / Bluetooth Control | Not Published / Not Required |
| Available Options | With Turning Signal / Without Turning Signal |
| Turning Signal Color | Amber / Yellow Appearance Shown in Current Product Imagery |
| Sequential Turn Signal | Not Reliably Published |
| Installation Position | Original Front Bumper Fog-Light Location |
| Installation Type | Vehicle-Specific Replacement / Plug-and-Play |
| Wire Cutting / Splicing | Not Required |
| Vehicle Coding | Not Specified as Required |
| Weather Resistance | Manufacturer Describes Waterproof / Weatherproof Construction |
| Published IP Rating | Not Published |
| Published Power Rating | Not Published |
| Published Lumen Output | Not Published |
| Published Color Temperature | Not Published |
| Published Dimensions | Not Published |
| Exact Housing Material | Not Published |
| Package Contents | Vehicle-Specific RGB Front Fog-Light Upgrade Set; Detailed Packing List Varies by Selected Vehicle / Turning-Signal Version and Is Not Fully Published |
Quick Answers
Which exact variant is selected in the supplied link? +
Variant 47108344053992 currently selects Model Y 2020–2025.03 with the With Turning Signal option.
Does it fit Model 3? +
Yes. The current Model 3 configuration covers Model 3 2017–2023.10.
Does it fit Model Y? +
Yes. The current Model Y configuration covers Model Y 2020–2025.03.
Does it fit Model 3 Highland? +
No. The current selector ends at Model 3 2023.10 and does not list the Highland front bumper.
Does it fit Model Y Juniper? +
No. Model Y Juniper uses a redesigned front end and is not included in the current compatibility selector.
Can I choose one RGB color and keep it on? +
No. The current manufacturer explicitly states that the seven RGB colors cannot be manually fixed to one color. They automatically transition through the built-in flowing sequence.
Does it use a smartphone app? +
No verified app or Bluetooth-control system is published for this product. The RGB sequence operates automatically.
What is the difference between With and Without Turning Signal? +
The With Turning Signal version adds turn-signal functionality to the upgraded front light assembly. The Without Turning Signal version omits that additional function.
Is the turn signal sequential? +
The current product page does not reliably publish the exact turn-signal animation or timing, so this description does not claim a sequential turn-signal function.
Does installation require cutting factory wires? +
No. Current manufacturer instructions describe the product as plug-and-play and do not require splicing the original wiring.
Is vehicle coding required? +
The current installation documentation does not identify software coding as a required installation step.
Is installation completely tool-free? +
No. Although the electrical connection is plug-and-play, accessing and replacing the factory bumper light assembly generally requires removal or loosening of surrounding trim and the original mounting hardware.
Are these lights waterproof? +
The manufacturer describes the assemblies as waterproof / weatherproof for exterior use, but no verified IP65 or IP67 rating is currently published.
Can I use the RGB colors while driving on public roads? +
Exterior vehicle-lighting regulations vary by location, and some jurisdictions restrict non-standard colored forward-facing lights on public roads. Check and follow your local regulations before using dynamic RGB lighting.
Are wattage, lumen output or dimensions published? +
No verified wattage, lumen output, color temperature, overall dimensions or specific IP rating are currently published, so this description does not invent those values.
