LED Rear Taillights for Model 3 Highland
LED Rear Taillights for Model 3 Highland
Couldn't load pickup availability
LED Rear Taillight Replacement for Tesla Model 3 Highland 2024+
Restore a damaged or malfunctioning outer rear taillight on your Model 3 Highland with a vehicle-specific replacement assembly designed around the factory mounting points, electrical connector and original rear-light functions.
LED Rear Light Assembly
Automotive-grade SMD LED technology provides the illuminated running-light, brake-light and turn-signal functions listed for the original Highland rear lamp position.
Highland-Specific Fit
Molded specifically for the redesigned Model 3 Highland outer rear lamp location rather than adapted from the pre-Highland Model 3.
Factory-Style Connection
Connects to the corresponding original vehicle harness and reuses the factory mounting locations, with no software coding listed as part of the replacement procedure.
Restore the Original Highland Rear Appearance
The C-shaped lamp design follows the refreshed Model 3 Highland rear quarter-panel styling for an integrated factory-style appearance.
Current manufacturer documentation lists brake-light operation as one of the functions retained by the replacement assembly.
The replacement is designed to preserve the corresponding factory turn-signal function on the selected left or right side.
The illuminated rear signature operates as the corresponding running / tail-light function listed for the replacement lamp.
Choose Left, Right or Pair instead of purchasing a complete two-side set when only one lamp is damaged.
Outer Taillight — Not the Inner Trunk Lamp
This listing is for the large outer Model 3 Highland rear taillight assembly mounted at the rear quarter-panel area. It should not be confused with the smaller inner lamp mounted on the trunk lid or with the rear bumper reflector / fog-light assembly.
Choose Left, Right or a Matching Pair
The current source page contains a comparison against “OEM halogen” lighting, but that comparison is not a reliable description of the Model 3 Highland factory taillight system. This page therefore does not make a quantified brightness claim.
Direct Model 3 Highland Replacement
Follow appropriate Tesla service precautions before disconnecting or replacing rear exterior lighting components.
Access the rear of the selected outer taillight and expose the factory electrical connector and mounting hardware.
Release the electrical connector and remove the original mounting hardware before carefully removing the damaged lamp.
Position the replacement lamp in the original opening, reconnect the factory harness and secure it using the corresponding mounting points.
Confirm the outer lamp sits evenly against the body and that seals, trim and mounting hardware are correctly seated.
Before completing reassembly, verify the running light, brake light and turn signal on the replaced side.
Current manufacturer and TESKAY installation information describes the replacement as plug-and-play and does not identify vehicle coding as a required step.
Model 3 2017–2023 uses a different rear-lamp design, mounting arrangement and electrical configuration. Order this product only for Model 3 Highland 2024+.
Specifications
| Attribute | Details |
|---|---|
| Product | LED Rear Taillight Replacement Assembly |
| Compatible Vehicle | Tesla Model 3 Highland 2024+ |
| Model 3 2017–2023 | Not Compatible |
| Model Y / S / X | Not Compatible |
| Position | Outer Rear Taillight / Rear Quarter-Panel Area |
| Purchase Options | Left / Right / Pair |
| Source Link Variant | No Specific Left / Right / Pair Variant Selected |
| LED Technology | Automotive-Grade SMD LED |
| Listed Functions | Running / Tail Light, Brake Light, Turn Signal |
| Installation | Direct Replacement / Factory Harness Connection |
| Wire Cutting / Splicing | Not Required by Current Installation Instructions |
| Vehicle Coding | Not Listed as Required |
| Manufacturer-Listed Operating Temperature | -40°C to +85°C |
| Published Package Dimensions | 35 × 20 × 10 cm |
| Quantified Brightness Claim | Not Used Here — Current Source Comparison to “OEM Halogen” Is Not Considered Reliable for Highland |
| Published IP Rating | Not Published |
| Published Power Consumption | Not Published |
| Published Lumen Output | Not Published |
| TESKAY Current Condition Note | Brand-New Light Assembly / OEM Module From Original Vehicle |
| Package Contents | Left: 1 × Left Taillight / Right: 1 × Right Taillight / Pair: Left + Right Taillight Assemblies |
Quick Answers
Which variant is selected in the supplied source link? +
The supplied URL does not contain a specific variant ID. Current purchase choices are Left, Right and Pair.
Which Tesla does this taillight fit? +
It is currently listed exclusively for Tesla Model 3 Highland 2024+.
Does it fit a 2017–2023 Model 3? +
No. Pre-Highland Model 3 vehicles use different taillight housings, mounting points and electrical connections.
Does it fit Model Y? +
No. Model Y uses a different rear-light assembly.
Is this the outer taillight or the trunk-lid inner light? +
This listing is for the larger outer taillight assembly mounted at the rear quarter-panel area. It is not the smaller inner trunk-lid lamp.
Is this the rear bumper reflector light? +
No. The rear bumper reflector / fog / reverse light is a separate component mounted lower in the bumper.
What functions does the replacement retain? +
Current manufacturer documentation lists the corresponding running light, brake light and turn-signal functions.
Can I buy just one side? +
Yes. Left and Right are sold separately, and a Pair option is also available.
Does installation require cutting wires? +
No wire cutting or splicing is listed. The replacement connects to the corresponding original harness.
Is software coding required? +
Current manufacturer and TESKAY information does not list coding as a required installation step.
Do I need professional installation? +
The electrical connection is designed as a direct replacement, but the taillight still requires removal of trim, electrical disconnection and correct alignment. Professional installation is a reasonable choice if you are not comfortable working around vehicle lighting and body trim.
Is it really three times brighter than the original Highland taillight? +
The source page contains a “3× brighter than OEM halogen” claim, but that comparison is not a reliable description of the Model 3 Highland factory LED taillight system. TESKAY therefore does not use a quantified brightness claim here.
Is the entire lamp assembly brand new? +
The current TESKAY product notice states “Brand-New Light Assembly” and separately notes “OEM Module From Original Vehicle.” This description preserves that distinction rather than describing every internal component as newly manufactured.
What operating temperature is published? +
The current manufacturer specification lists an operating range of -40°C to +85°C.
Is an IP waterproof rating published? +
No verified IP rating is currently published for this exact taillight listing, so this page does not invent an IP65, IP67 or IP68 specification.
