Bi-Xenon HID Headlight Replacement for Model S (12-15)

Bi-Xenon HID Headlight Replacement for Tesla Model S 2012–2015

Replace a damaged, cracked or worn front headlight on an early Tesla Model S with a vehicle-specific Bi-Xenon HID headlight assembly. Designed for pre-facelift “nose-cone” Model S vehicles equipped with the matching Xenon / HID lighting configuration.

Replacement Headlight for Early Model S

For Matching Xenon / HID Vehicles
This assembly is intended for Model S vehicles that already use the matching Bi-Xenon / HID headlight configuration.

Repair One Side or Both
Select the left, right or pair option according to the headlight assembly that needs replacement.

Designed Around the Original Mounting Layout
The assembly follows the early Model S headlight housing and mounting arrangement, but final compatibility should always be confirmed against the original light before installation.

Available Position Options

How Left & Right Are Identified

Left and right are identified from the driver's seated position while facing forward. Select the side that corresponds to the headlight being replaced.

Vehicle Compatibility

⚠️ Pre-Facelift “Nose-Cone” Model S Only

This headlight is designed for the early 2012–2015 Model S body style. Do not assume compatibility with facelift or later Model S headlights, which use different lamp designs and mounting arrangements.

⚠️ Confirm Your Original Headlight Before Ordering

Model year alone is not enough to confirm fitment. Compare your original light type, connector, housing shape, mounting tabs and original headlight label with the replacement assembly before purchase.

Bi-Xenon / HID Lighting Configuration

This product is intended for vehicles equipped with the matching Xenon / HID headlight system.

Do not order it as a substitute for a different headlight technology or later headlight revision unless the housing, connector and original light specification have been confirmed to match.

Specifications

⚠️ Electrical Specifications Are Not Published

The current Tesery page does not publish bulb type, ballast specification, HID wattage, color temperature, lumen output, connector pin count, OE part number, DOT approval or E-mark certification. Do not add these specifications unless they are confirmed for the exact assembly.

Package Configuration

Left: 1 × Vehicle-Left Headlight Assembly

Right: 1 × Vehicle-Right Headlight Assembly

Left & Right Pair: 1 × Left Headlight Assembly + 1 × Right Headlight Assembly

Installation Overview

1. Switch Off the Vehicle Lighting System
Make sure the vehicle and headlight system are switched off before beginning removal.

2. Compare the Replacement Assembly
Before fully removing the original light, compare the housing, mounting tabs, connector and overall shape with the replacement.

3. Access the Original Headlight
Headlight replacement may require loosening or removing surrounding front fascia components to access the mounting hardware.

4. Transfer or Connect Required Components
Connect the replacement assembly only after confirming that all electrical connections and mounting points match the original configuration.

5. Secure the Headlight Assembly
Install the assembly in the factory mounting position and confirm that all fasteners and surrounding panels are correctly seated.

6. Test & Align the Beam
After installation, verify headlight operation and have the beam alignment checked and adjusted as necessary.

⚠️ Professional Installation Recommended

Tesery recommends professional installation and beam alignment. Incorrect installation or aiming can affect headlight performance and may create glare for other road users.

⚠️ HID Lighting Uses High-Voltage Components

Xenon / HID lighting systems can use high-voltage ignition components. Do not service energized HID components. If you are not experienced with automotive lighting systems, use a qualified technician.

⚠️ Check Local Lighting Requirements

Headlight beam pattern, aiming and lighting regulations can vary by country and region. Confirm that the installed assembly is appropriate for your vehicle and local road-use requirements.

Quick Answers