18″ 19″ 20″ Wheel Covers for Tesla Model 3 / Model Y (4PCS)
18″ 19″ 20″ Wheel Covers for Tesla Model 3 / Model Y (4PCS)
Couldn't load pickup availability
18″ / 19″ / 20″ Full Wheel Covers for Tesla Model 3 / Model Y
Give your Tesla wheels a sportier, more complete appearance while adding an extra layer of protection over the original wheel surface. These full-coverage ABS wheel covers are designed for specific Model 3 Aero and Model Y Gemini or Induction wheels, with secure snap-on installation and dedicated valve access.
🛡 Full Wheel Coverage
The cover extends across the visible wheel face to help reduce direct exposure to light scratches, road debris, rain and everyday wear.
⚙️ Durable ABS Construction
Made from ABS material selected for its toughness and resistance to normal scratches and wear encountered during everyday driving.
🔒 Secure Buckle Installation
Vehicle-specific buckle positioning allows the wheel cover to snap onto the compatible original wheel without drilling, adhesives or permanent modification.
💨 Valve Access Preserved
A dedicated opening is retained for the tire valve so normal tire-pressure checks and inflation can be performed without removing the wheel cover.
Refresh the Look of Your Original Tesla Wheels
Sportier Full-Coverage Design
The wheel-face design gives the original Tesla wheels a more aggressive visual appearance without replacing the entire wheel.
Helps Protect the Original Wheel Surface
The cover acts as an additional exterior layer over the wheel face, helping reduce direct exposure to minor scuffs, rain, road debris and everyday cosmetic wear.
Aerodynamic-Inspired Styling
The directional wheel-cover design is shaped around airflow management while maintaining the clean, streamlined appearance associated with Tesla wheels.
Choose the Correct Wheel Version
| Vehicle | Original Wheel | Supplier-Listed Fitment |
|---|---|---|
| Tesla Model 3 | 18″ Aero | 2017–2023.10 |
| Tesla Model Y | 19″ Gemini | 2020–2024 |
| Tesla Model Y | 20″ Induction | 2020–2024 |
⚠️ Wheel Style Matters
Compatibility is determined by both the Tesla model and the original wheel design. Select the 18″ Aero, 19″ Gemini or 20″ Induction version that matches your factory wheels. A matching wheel diameter alone does not guarantee compatibility with a different wheel design.
⚠️ Not for Model 3 Highland or Model Y Juniper
The current supplier selector lists Model 3 18″ Aero wheels for 2017–2023.10 and Model Y Gemini / Induction wheels for 2020–2024. Model 3 Highland and Model Y Juniper use different wheel designs and should not be assumed compatible with this product.
Specifications
| Attribute | Details |
|---|---|
| Product Type | Full Wheel Cover / Hubcap |
| Material | ABS |
| Available Wheel Sizes | 18″ / 19″ / 20″ |
| Quantity | 4 PCS / Set |
| Coverage | Full Wheel-Face Coverage |
| Installation | Snap-On Buckle Installation |
| Valve Access | Reserved Valve Opening |
Package Includes
4 × Tesla Wheel Covers
Installation Guide
1. Confirm the Wheel Version
Before installation, verify that the selected cover matches your original Tesla wheel: 18″ Aero, 19″ Gemini or 20″ Induction.
2. Remove the Existing Wheel Cover
If your original wheel has a removable factory wheel cover installed, carefully remove it before fitting the replacement.
3. Locate the Valve Opening
Align the reserved valve opening on the new wheel cover with the tire valve before pressing the cover into position.
4. Align the Buckles
Position the wheel cover evenly over the original wheel and make sure the retention points are aligned correctly.
5. Press Evenly Into Place
Apply even pressure around the outer edge until all retention points are securely engaged.
6. Check Before Driving
Gently pull around the perimeter to confirm each wheel cover is fully seated and secure.
⚠️ Installation Safety
Always verify that every retaining buckle is fully engaged before driving. After initial installation, inspect the wheel covers again after a short drive to confirm that all four covers remain securely seated.
Cleaning & Care
Wash the wheel covers with water, automotive shampoo and a soft sponge or microfiber wash mitt.
Avoid aggressive solvents, sharp tools or abrasive brushes that may scratch the ABS surface or damage the finish.
Quick Answers
Are these complete replacement wheels?
No. These are wheel covers that install over compatible original Tesla wheels. Wheels and tires are not included.
How many wheel covers are included?
The current supplier listing is sold as a four-piece set for all four wheels.
What material are they made from?
The supplier specifies ABS construction.
Which Model 3 wheels are compatible?
The current supplier selector lists Tesla Model 3 18″ Aero wheels from 2017 through 2023.10.
Which Model Y wheels are compatible?
The current supplier selector lists Model Y 19″ Gemini and 20″ Induction wheels for 2020–2024.
Do they fit Model 3 Highland?
No Highland fitment is listed for this product. The Model 3 version is specified for 18″ Aero wheels from 2017–2023.10.
Do they fit Model Y Juniper?
No Juniper fitment is listed in the current product selector. The Model Y versions are specified for 19″ Gemini or 20″ Induction wheels from 2020–2024.
Do I need to remove the cover to inflate the tires?
No. The wheel covers include a reserved opening for the tire valve, allowing normal tire-pressure checks and inflation without removing the cover.
Can the wheel covers be removed and reinstalled?
Yes. The supplier describes the covers as removable and reinstallable for maintenance or customization.
Share
